DTF or UVDTF Print - Celtic

Please Choose What size DTF/UVDTF print you would like:

Max Width 29cm

Instructions for applying UVDTF transfers

Please familiarize yourself before beginning the application

• Step 1
  Thoroughly clean the surface you will be applying your UVDTF transfer - Do not use alcohol to clean the surface.
• Step 2
  Before removing the backing paper, using a squeegee and a small amount of pressure, rub over both sides of your UVDTF to ensure that the design has been properly transferred to the B film. 
• Step 3
  Slowly begin to peel the B film away from the backing paper whilst taking care to make sure that the design has transferred to the B film fully. 
• Step 4
  Carefully place the design onto the prepped surface ensuring that it is positioned correctly as you will not be able to remove once it has adhered to any surface 
• Step 5
  Rub over the surface of your UVDTF with a squeegee or sponge to ensure that the design has transferred to the prepped surface sufficiently. Work from the centre outwards to remove any unwanted air bubbles.
• Step 6 
  Slowly peel back the B film to reveal the final design 
  
  Note: We recommend hand washing only 

DTF PRESSING INSTRUCTIONS

• Set Press to 160 Degrees.
• Use light to medium pressure.
• Place garment on the press, place printed image into position and cover with parchment paper
• Press for 30 seconds.
• Our film is cold release, wait 90 seconds or until cold to touch before removing the backing film.
• Then re-cover the garment with parchment paper and re-press for max 5-6 seconds.
• Please wait 24 hours before stretching or washing the transfers.
• 30C wash cycle
• Turn garment inside-out
• Do not tumble dry